CircuitPython / Sensors

If you're looking to measure temperature, humidity, motion, force, orientation, or a number of other variables, look no further – we've got a bunch of CircuitPython-compatible Adafruit sensors for you to choose from! Every item in this category has a CircuitPython driver ready to go, for fast and easy usage. With a wide and growing range of sensors, this will be a great place to continue checking for more fun sensors for your CircuitPython projects.

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates - PA1616S

Product ID: 746

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that. It's got everything you want and more: -165 dBm sensitivity, 10 Hz updates, 66 channels. 5V friendly design and only 20mA current draw....

$29.95

5 in stock

Overhead shot of power sensor breakout with pre-soldered terminal block.

Adafruit INA260 High or Low Side Voltage, Current, Power Sensor

Product ID: 4226

This breakout board may well be the last current sensing solution you every need to buy. Not only can it do the work of two multimeters, but it can do it with amazing precision and flexibility. With it you can measure high or low side DC current, the bus voltage, and have it automatically calculate the power. It can do so over impressive voltage, current, and...

$9.95

In stock

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor - STEMMA QT

Product ID: 2652

Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of indoor environmental sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost sensing solution for measuring humidity with ±3% accuracy,...

$14.95

In stock

Waterproof 1-Wire DS18B20 Compatible Digital temperature sensor coiled around a US quarter and a resister above it.

Waterproof 1-Wire DS18B20 Digital temperature sensor

Product ID: 381

This is a pre-wired and waterproofed (with heat shrink) version of a 1 Wire DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances!...

$9.95

In stock

Angled shot of a small, blue, rectangular temperature sensor breakout board.

MCP9808 High Accuracy I2C Temperature Sensor Breakout Board

Product ID: 1782

This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. There are 3 address pins so you can connect up to 8 to a single I2C bus without address...

$4.95

In stock

Angled shot of black, rectangular light sensor breakout.

Adafruit AS7341 10-Channel Light / Color Sensor Breakout - STEMMA QT / Qwiic

Product ID: 4698

The Adafruit AS7341 10-Channel Light / Color Sensor Breakout is a multi-channel spectrometer, which is a special type of light sensor that is able to detect not only the amount of light present but also the amounts of light within different wavelengths. This means that you can use it to detect much better than the human eye is capable of, what color or colors of...

$15.95

In stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max - STEMMA QT

Product ID: 904

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219 chip on this breakout to both measure both the high side voltage and DC current draw over I2C with ±1% precision. Please Note: As of Sept 2022, due to the severe chip shortage, we've had to update this design to use...

$9.95

14 in stock

Angled shot of black, rectangular temperature and humidity sensor breakout.

Adafruit HDC3022 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 5989

We stock a large number of Temperature/Humidity sensors, so you're probably wondering why another one? Well, this Adafruit HDC3022 Precision Temperature & Humidity Sensor breakout features the highest accuracy & precision one we've see so far! It has the TI HDC302x series chip with typical 0.5% accuracy for the RH sensor (with 0.19% long-term drift) and...

$8.95

60 in stock

Angled Shot of a Adafruit Universal Thermocouple Amplifier Breakout Board.

Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

Product ID: 3263

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long time we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. Now we're happy to offer a great new thermocouple amplifier/converter that can handle just about any type...

$17.50

In stock

Adafruit AHT20 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Product ID: 4566

The AHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22. You can take sensor readings as often as you like, and it uses standard I2C so its super easy to use with any Arduino or Linux/Raspberry Pi board. This sensor has a typical accuracy of +- 2% relative humidity, and +-0.3 °C at 20-80% RH and 20-60...

$4.50

In stock

Adafruit NAU7802 24-Bit ADC - STEMMA QT / Qwiic

Product ID: 4538

If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat! The Adafruit NAU7802 contains a super-high-resolution 24-Bit differential ADC with extra gain and calibration circuitry that makes it perfect for measuring strain gauges / load cells or other sensors that have four...

$5.95

In stock

Angled shot of an ultrasonic sonar distance sensor.

Ultrasonic Distance Sensor - 3V or 5V - HC-SR04 compatible - RCWL-1601

Product ID: 4007

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll just have to make do with these handy 3V Ultrasonic Sonar Distance Sensor and a pair of flippers. These ubiquitous sensors are really common in...

$3.95

In stock

Black wire with epoxy nub end, plus a resistor, coiled around a quarter

10K Precision Epoxy Thermistor - 3950 NTC

Product ID: 372

Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets cooler. For specific temperature-to-resistance, check the lookup table. These are often used for air...

$4.00

In stock

Angled shot of black rectangular temperature-humidity sensor breakout.

Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 5665

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHT45 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT45 has an excellent ±1.0% typical relative humidity accuracy from 25 to...

$12.50

In stock

Top view of temperature sensor breakout above an OLED display FeatherWing. The OLED display reads "MCP9808 Temp: 24.19ºC"

Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic

Product ID: 5027

The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. With three address jumpers on the back, you can connect up to 8 to a single I2C bus...

$4.95

In stock

Angled shot of a square, blue, thermocouple amplifier with a green terminal block.

Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T

Product ID: 4101

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that for you, and can be easily interfaced with any microcontroller or single-board-computer with I2C. Inside, the chip handles all the analog stuff for you, and can interface with just about any thermocouple type: K, J, T, N, S, E, B and R...

$15.95

In stock

Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

Product ID: 3290

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name...

$11.95

In stock

Top down view of a Adafruit LIS3DH Triple-Axis Accelerometer.

Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)

Product ID: 2809

The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer: Three axis sensing, 10-bit precision. ±2g/±4g/±8g/±16g selectable scaling. Both I2C (2 possible addresses) and SPI interface options. Interrupt output. Multiple data rate options 1 Hz to 5Khz. As...

$4.95

In stock

Adafruit TSL2591 High Dynamic Range Digital Light Sensor - STEMMA QT

Product ID: 1980

When the future is dazzlingly-bright, this ultra-high-range luminosity sensor will help you measure it. The TSL2591 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing...

$6.95

In stock

Angled shot of a Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor.

Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic

Product ID: 3595

This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your project with the Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor. When connected to your microcontroller (running our library code) it can detect simple gestures (left to right, right to left, up to down, down to up are...

$7.50

In stock

Adafruit BH1750 Light Sensor with STEMMA QT / Qwiic

Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic

Product ID: 4681

This is the BH1750 16-bit Ambient Light Sensor from Rohm. Because of how important it is to humans and most other living things, sensing the amount of light in an environment is a common place to get started when learning to work with microcontrollers and sensors. Should we turn up the brightness of our display or dim it to save power? Which direction should your...

$4.50

In stock

Adafruit BMP390L Precision Barometric Pressure and Altimeter

Adafruit BMP390 - Precision Barometric Pressure and Altimeter - STEMMA QT / Qwiic

Product ID: 4816

Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388... now we've got the next generation, the Adafruit BMP390 (we refer to it as the BMP390L or BMP390, same thing!) Precision Barometric Pressure and Altimeter Breakout. As you would expect, this sensor is similar to its earlier versions but even better. The BMP390 has better...

$10.95

In stock

HC-SR04 Ultrasonic Sonar Distance Sensor + 2 x 10K resistors

Product ID: 3942

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll just have to make do with these handy HC-SR04 Ultrasonic Sonar Distance Sensors and a pair of flippers. These ubiquitous sensors are really common in...

$3.95

In stock

Platinum RTD Sensor - PT1000 - 3 Wire 1 meter long

Product ID: 3984

$14.95

In stock

Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor - STEMMA QT

Product ID: 2651

Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost, precision sensing solution...

$9.95

In stock

Angled shot of a Adafruit TLV493D Triple-Axis Magnetometer.

Adafruit TLV493D Triple-Axis Magnetometer - STEMMA QT / Qwiic

Product ID: 4366

The TLV493D 3-axis magnetometer is a great little sensor for detecting magnets in 3D. In fact, the manufacturer Infineon suggests it could be used to make a joystick! You could also use it for other cool things like detecting objects with magnets attached, like the lid of a box, or maybe a statue that unlocks your secret lair when placed on your mantle? The TLD493D...

$5.95

In stock

Soil sensor in small potted plant, with wires connected to Adafruit Metro

Adafruit STEMMA Soil Sensor - I2C Capacitive Moisture Sensor - JST PH 2mm

Product ID: 4026

Most low cost soil sensors are resistive style, where there's two prongs and the sensor measures the conductivity between the two. These work OK at first, but eventually start to oxidize because of the exposed metal. Even if they're gold plated! The resistivity measurement goes up and up, so you constantly have to re-calibrate your code. Also, resistive measurements...

$7.50

In stock

Angled shot of black, square-shaped thermocouple breakout board with a green 2-pin terminal block.

Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade)

Product ID: 269

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested....

$14.95

In stock

Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm

Product ID: 3317

The VL53L0X is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny invisible laser source, and a matching sensor. The VL53L0X can detect the "time of flight", or how long the light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of only the surface directly...

$14.95

In stock

Adafruit VL53L4CD Time of Flight Distance Sensor - ~1 to 1300mm - STEMMA QT / Qwiic

Product ID: 5396

The Adafruit VL53L4CD Time of Flight Sensor is another great Time of Flight distance sensor from ST in the VL5 series of chips, this one is great for shorter distances. The sensor contains a very tiny invisible laser source and a matching sensor. The VL53L4CD can detect the "time of flight", or how long the light has taken to bounce back to the sensor. Since it uses...

$14.95

In stock

Adafruit BME688 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Product ID: 5046

The long-awaited BME688 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price! The BME688 is a 'drop in' replacement for the BME680 - it adds a method of programming the gas-sensor heater for...

$19.95

In stock

Angled shot of small, blue square-shaped pressure sensor breakout board.

Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

Product ID: 3965

We stock a few barometric pressure sensors, great for altitude and weather measurements. This pressure sensor is special because it comes with a metal port! Unlike other pressure sensors, you can easily attach a tube to it, to measure air pressure inside a close space. In particular we think this would be a great sensor for use with making DIY assistive tech "Sip...

$29.95

In stock

Top view of black humidity sensor sensor wired to a breadboard with an FeatherWing OLED display. The OLED shows the data from the temperature-humidity sensor.

AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor

Product ID: 5181

The AM2301B is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the AM2302. In fact, this enclosed sensor looks an awful lot like the popular DHT22/AM2302 temperature and humidity sensors, but unlike classic DHT sensors, it has an I²C interface! That's right, you do not need to use a bit-bang timing-specific protocol to...

$7.95

59 in stock

Angled Shot of a Adafruit PT100 RTD Temperature Sensor Amplifier.

Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

Product ID: 3328

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this resistance sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus...

$14.95

In stock

Adafruit VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT / Qwiic

Product ID: 4162

Vishay has a lot of light sensors out there, and this is a nice simple lux sensor that's easy to add to any microcontroller. Most light sensors just give you a number for brighter/darker ambient lighting. The VEML7700 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you...

$4.95

In stock

IR (Infrared) Receiver Sensor plugged into breadboard

IR (Infrared) Receiver Sensor - TSOP38238

Product ID: 157

IR sensor tuned to 38KHz, perfect for receiving commands from a TV remote control. Runs at 3V to 5V so it's great for any microcontroller. To use, connect pin 3 (all the way to the right) to 5V power, pin 2 (middle) to ground and listen on pin 1. It doesn't do any decoding of the signal, just passes the 'raw data' along. Check the TSOP38238 datasheet for more details...

$1.95

In stock

Adafruit PMSA003I PM2.5 Air Quality Breakout

Adafruit PMSA003I Air Quality Breakout - STEMMA QT / Qwiic

Product ID: 4632

Breathe easy, knowing that you can track and sense the quality of the air around you with this Adafruit PMSA003I Air Quality Breakout. This sensor is great for monitoring air quality, in a compact plug-in format. Best of all, unlike almost all other sensors we've seen that are UART interface, this one is I2C interface, which makes it a great match for single-board...

$44.95

84 in stock

Top view of AM2315C sensor wired to a breadboard with an FeatherWing OLED display. The OLED shows the data from the temperature-humidity sensor.

AM2315C - Encased I2C Temperature/Humidity Sensor

Product ID: 5182

The AM2315C is a nice, enclosed temperature and humidity sensor from the same folks that brought us the AM2315. In fact, this enclosed sensor looks an awful lot like the popular AM2315 temperature and humidity sensors, but inside is the AHT20. You can power it with anything from 2.5V to 5.5V so it's good with 3V or 5V microcontrollers. You can take sensor readings as...

$26.95

In stock

Top view of DHT20 sensor wired to a breadboard with an FeatherWing OLED display. The OLED shows the data from the temperature-humidity sensor.

DHT20 - AHT20 Pin Module - I2C Temperature and Humidity Sensor

Product ID: 5183

The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22. This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I²C interface! That's right, you do not need to use a bit-bang timing-specific protocol to talk to the...

$4.50

In stock

PIR (motion) sensor

Product ID: 189

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensitivity and we include a 1 foot (30 cm) cable with a socket so you can easily reposition the sensor or mount it using the two holes on either side. Runs on...

$9.95

In stock

Overhead shot of humidity / temperature sensor breakout connected to an OLD screen, which displays the ambient temperature and humidity.

Adafruit Sensirion SHT41 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 5776

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. The SHT41 sensor is the fourth generation of I2C temperature and humidity sensor from Sensirion. (They started at the SHT10 and worked its way up to the top!). The SHT41 has an excellent ±1.8% typical relative humidity accuracy from 25 to 75% and...

$5.95

In stock

Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865

Product ID: 3648

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, basically a kind of thermistor. In this resistance sensor, the resistor is actually a small strip of Platinum with a resistance of 1000 ohms at 0°C, thus...

$14.95

In stock

Adafruit VCNL4040 Proximity and Lux Sensor - STEMMA QT / Qwiic

Product ID: 4161

The VCNL4040 is a handy two-in-one sensor, with a proximity sensor that works from 0 to 200mm (about 7.5 inches) and light sensor with range of 0.0125 to 6553 lux. We've all been there. That thing is close but how close? When you need to measure a small distance with reasonable accuracy, such as the rough height of particularly calm bumble bee, the VCNL4040 Proximity...

$5.95

In stock

Adafruit Ultimate GPS GNSS with USB - 99 channel w/10 Hz updates

Product ID: 4279

The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With the built-in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Power and transport data over any USB type C cable, with handy onboard indicator LEDs that let...

$29.95

In stock

Adafruit Sensirion SHT40 Temperature & Humidity Sensor wired to Feather with QT cable, showing temperature and humidity on OLED.

Adafruit Sensirion SHT40 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 4885

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHT40 sensor is the fourth generation (started at the SHT10 and worked its way up to the top!). The SHT40 has an excellent ±1.8% typical relative humidity accuracy from 25 to...

$5.95

In stock

TMP36 Analog Temperature sensor next to quarter

TMP36 - Analog Temperature sensor - TMP36

Product ID: 165

Wide range, low power temperature sensor outputs an analog voltage that is proportional to the ambient temperature. To use, connect pin 1 (left) to power (between 2.7 and 5.5V), pin 3 (right) to ground, and pin 2 to analog in on your microcontroller. The voltage out is 0V at -50°C and 1.75V at 125°C. You can easily calculate the temperature from the voltage...

$2.75

7 in stock

Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic

Product ID: 4831

The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Unlike the Si1145, this sensor will not give you UV Index readings. However, the Si1145 does UV Index...

$4.95

In stock

Angled shot of black, square-shaped, chain-able sensor breakout board.

Adafruit DS2482S-800 8 Channel I2C to 1-Wire Bus Adapter - STEMMA QT / Qwiic

Product ID: 6027

This is a DS2482S-800 Stemma QT board that uses a I2C-to-1W controller chip, with 8 selectable channels, built-in parasitic-power-pullups, adjustable I2C address and a wide operating voltage range! You can easily connect it to an existing I2C bus and then use the breakout pads to attach multiple DS18B20's, or pair it with our 1-Wire chaining breakouts for fancier...

$19.95

89 in stock

Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor - STEMMA QT

Product ID: 3660

The long awaited BME680 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. All over SPI or I2C at a great price! Like the BME280 & BMP280, this precision sensor from Bosch can measure humidity with ±3% accuracy,...

$18.95

In stock

Adafruit 12-Key Capacitive Touch Sensor Breakout with Stemma QT

Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121 - STEMMA QT

Product ID: 1982

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touchpads. The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresses with the ADDR pin, for a total...

$7.95

In stock

Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor - STEMMA QT / Qwiic

Product ID: 4821

The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. In addition to the obvious support for reading the temperature, the TMP117 can also monitor the temperature and alert you when corrective action needs to be taken. We use the TMP117 (not N or M) variant, which has...

$11.50

In stock

Top view of LiPoly / LiIon Fuel Gauge and Battery Monitor powered by a Lipoly battery and an OLED display.

Adafruit MAX17048 LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH & QT / Qwiic

Product ID: 5580

Low cost Lithium Polymer batteries have revolutionized electronics - they're thin, they're light, they can be regulated down to 3.3V and they're easy to charge. On your phone, there's a little image of a battery cell that tells you the percentage of charge - so you know when you absolutely need to plug it in and when you can stay untethered. The Adafruit MAX17048...

$5.95

In stock

ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic

Product ID: 4097

Analog Devices has followed up on their popular classic, the ADXL345, with this near-drop-in-replacement, the ADXL343. Like the original, this is a triple-axis accelerometer with digital I2C and SPI interface breakout. It has a wide sensitivity range and high resolution, operating with an 10 or 13-bit internal ADC. Built-in motion detection features make tap,...

$5.95

In stock

Angled Shot of the Adafruit HX711 24-bit ADC.

Adafruit HX711 24-bit ADC for Load Cells / Strain Gauges

Product ID: 5974

If you are feeling the stress and strain of modern life a Wheatstone bridge and you want to quantify it, this handy breakout will do the job, no sweat! The Adafruit HX711 Breakout contains a super-high-resolution 24-Bit differential ADC with extra gain circuitry that makes it perfect for measuring strain gauges / load cells or other sensors that have four wires that...

$9.95

In stock

Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180) - STEMMA QT

Product ID: 3316

The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser source, and a matching sensor. The VL6180X can detect the "time of flight", or how long the laser light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of...

$13.95

In stock

Angled shot of a Thermocouple Type-K Glass Braid Insulated wire.

Thermocouple Type-K Glass Braid Insulated - K

Product ID: 270

Thermocouples are best used for measuring temperatures that can go above 100 °C. This is a bare wires bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200 °C, this one uses a fiberglass braid so it can be used in high temperature measurements such as heaters and ovens....

$9.95

In stock

ADXL345 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic

Product ID: 1231

Filling out our accelerometer offerings, we now have the really lovely digital ADXL345 from Analog Devices, a triple-axis accelerometer with digital I2C and SPI interface breakout. We added an on-board 3.3V regulator and logic-level shifting circuitry, making it a perfect choice for interfacing with any 3V or 5V microcontroller such as the Arduino. The sensor has...

$17.50

In stock

Angled shot of Adafruit SCD-41 - NDIR CO2 Temperature and Humidity Sensor.

Adafruit SCD-41 - True CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic

Product ID: 5190

Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from and then breathes out carbon dioxide. CO2 is essential for life on this planet we call Earth - we and plants take turns using and emitting CO2 in an elegant symbiosis. But it's important to keep that CO2 balanced - you...

$49.95

In stock

Adafruit Sensirion SHT31-D Humidity sensor

Adafruit Sensirion SHT31-D - Temperature & Humidity Sensor

Product ID: 2857

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a true I2C interface for easy reading. The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses. We now use the version with a PTFE filter, it'll stay clean while still...

$13.95

In stock

MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor

Product ID: 1893

This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). It has some upsides compared to the BMP280, such as interrupt outputs for ultra-low power usage,...

$9.95

81 in stock

Angled shot of a Adafruit SGP30 Air Quality Sensor Breakout.

Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

Product ID: 3709

Breathe easy with the SGP30 Multi-Pixel Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. The SGP combines multiple metal-oxide sensing elements on one chip to provide more detailed...

$17.50

In stock

Angled shot of black, rectangular breakout board with a green 3-pin terminal block.

Adafruit DS2484 I2C to 1-Wire Bus Adapter Breakout - STEMMA QT / Qwiic JST SH 1mm

Product ID: 5976

By customer request, this is a DS2484 Stemma QT board that uses a I2C-to-1W controller chip, with ESD protection and support for split supplies. You can easily connect it to an existing I2C bus and then use the screw terminals to attach multiple DS18B20's, or pair it with our 1-Wire chaining breakouts for fancier experimentation. You're probably familiar with the...

$7.50

In stock

Adafruit Sensirion SHTC3 Temperature & Humidity Sensor - STEMMA QT / Qwiic

Product ID: 4636

Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And finally, we have some that have a true I2C interface for easy reading. The SHTC3 sensor has an excellent ±2% relative humidity and ±0.2 °C accuracy for most uses. Unlike some earlier SHT sensors, this sensor has a true I2C interface on...

$6.95

In stock

Adafruit MS8607 Pressure Humidity Temperature Sensor

Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic

Product ID: 4716

Because of their many applications, Pressure, Temperature, and Humidity sensors (PHT sensors) are a common offering from semiconductor companies. The MS8607 PHT sensor from TE Connectivity does an admirable job of measuring a wide range of all three environmental conditions. Each and every MS8607 sensor is calibrated at the factory and the calibration constants...

$14.95

In stock

ADT7410 High Accuracy I2C Temperature Sensor Breakout Board - Stemma QT

Product ID: 4089

Analog Devices, known for their reliable and well-documented sensor chips - has a high precision and high resolution temperature sensor on the market, and we've got a breakout to make it easy to use! The Analog Devices ADT7410 gets straight to the point - it's an I2C temperature sensor, with 16-bit 0.0078°C temperature resolution and 0.5°C temperature...

$5.95

In stock

AM2320 Digital Temperature and Humidity Sensor

Product ID: 3721

This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity sensors, but unlike classic DHT sensors, it has an I2C interface! That's right, you do not need to use a bit-bang timing-specific protocol to talk to the AM2320, it uses plain-old-I2C. Whew, that makes things a little easier, doesn't it? But! We'll let you know, this sensor is...

$3.95

In stock

Capacitive Touch Sensor Breakout on breadboard with hand touching many attached wires

CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

Product ID: 1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboard LEDs when the matching touch sensor fires to help you debug your...

$7.95

80 in stock

Adafruit Chainable DS18B20 Extender Breakout - STEMMA JST PH 2mm

Product ID: 5971

One of the perks of working at adafruit is you get to request hardware - and you'll probably get fast turnaround! One of our adafruit.io developers requested "an easy way to chain DS18B20 sensors for testing with adafruit.io's wippersnapper service" at 11:54am one Monday morning, and after a few back-and-forth's we came up with the Adafruit Chainable DS18B20 Extender...

$4.50

In stock

Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier - STEMMA QT / Qwiic

Product ID: 5165

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9601 I2C Thermocouple Breakout (a.k.a MCP96L01) does all that for you and can be easily interfaced with any microcontroller or single-board computer with I2C. Inside, the chip handles all the analog stuff for you, and can interface with just about any...

$14.95

In stock

Angled shot of BMP388 temperature and pressure sensor.

Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT

Product ID: 3966

Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, and BMP280... now we've got the next generation, the Adafruit BMP388 Precision Barometric Pressure sensor. As you would expect, this sensor is similar to its earlier versions but even better. The BMP388 has better precision than ever, which makes it excellent for environmental sensing or...

$9.95

In stock

VCNL4010 Proximity/Light sensor

Product ID: 466

The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good if the object is over 10 cm away. The VCNL4010 is designed for much shorter distances, no more than 200mm (about 7.5") and under our experimentation we...

$7.50

56 in stock

Angled shot of black, rectangular ADC breakout board.

Adafruit ADS7830 8-Channel 8-Bit ADC with I2C - STEMMA QT / Qwiic

Product ID: 5836

Many microcontrollers have ADCs these days, for reading analog/resistive sensors like potentiometers, thermistors, LDR light sensors, etc. but sometimes you need MOAR! Or maybe you're using a single board computer like a Raspberry Pi that has no ADCs at all! The Adafruit ADS7830 8-Channel 8-Bit ADC with I2C is an affordable 8-channel ADC with I2C interface, so it's...

$5.95

In stock

Angled shot of Adafruit SCD-40 - NDIR CO2 Temperature and Humidity Sensor.

Adafruit SCD-40 - True CO2, Temperature and Humidity Sensor - STEMMA QT / Qwiic

Product ID: 5187

$44.95

In stock

Top down view of a white High Temp Waterproof DS18B20 Digital temperature sensor.

High Temp Waterproof DS18B20 Digital temperature sensor + extras

Product ID: 642

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive than the other waterproof version we have with a PVC cable because this one can be used up to 125°C - the limit of the sensor itself. That said, it's...

$14.95

52 in stock

Angled shot of purple rectangular breakout board.

ADXL375 - High G Accelerometer (+-200g) with I2C and SPI - STEMMA QT / Qwiic

Product ID: 5374

Hey rocket man (burnin' out your fuse out there alone) ever wonder how fast you're rocketing? The Adafruit ADXL375 High G Accelerometer is an epic +-200g 3-axis accelerometer may be able to tell the answer. You read that right, this accelerometer can sense up to 200 g's of force in three axes of measurements (X Y Z) has and pins that can be used either as I2C or SPI...

$24.95

In stock

Angle Shot of NFC/RFID controller breakout board

PN532 NFC/RFID controller breakout board - v1.6

Product ID: 364

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and 'act' like a NFC tag. If you want to do any sort of embedded NFC work, this is the chip you'll want to use! NFC (Near Field...

$39.95

In stock

Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic

Product ID: 4413

Do you know which way the wind blows? You will now, with this triple-axis accelerometer/magnetometer compass module. Inside are two sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity). The other is a magnetometer that can sense where the strongest magnetic force is coming from, generally...

$12.50

In stock

Thermocouple Type-K Glass Braid Insulated Stainless Steel Tip

Product ID: 3245

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare wires stainless-steel tip probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so it can be used in high temperature measurements such as heaters...

$9.95

In stock

Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade - STEMMA QT / Qwiic

Product ID: 5606

*sniff* *sniff* ... do you smell that? No need to stick your nose into a carton of milk anymore, you can build a digital nose with the ENS160 Gas Sensor, a fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at ScioSense, with I2C interfacing so you don't have to manage the heater and analog reading of a MOX sensor. It...

$21.95

In stock

Adafruit MLX90640 24x32 IR Thermal Camera Breakout - 110 Degree FoV

Product ID: 4469

You can now add affordable heat-vision to your project and with an Adafruit MLX90640 Thermal Camera Breakout. This sensor contains a 24x32 array of IR thermal sensors. When connected to your microcontroller (or Raspberry Pi) it will return an array of 768 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple...

$74.95

In stock

angled shot of rectangular camera breakout.

Adafruit OV5640 Camera Breakout - 120 Degree Low Distortion

Product ID: 5839

Hobby-level microcontrollers are finally getting big and powerful enough to start handling camera modules that historically would have required a full computer or FPGA to handle. The RP2040 and ESP32-Sx series of chips, for example, have enough pins to communicate with the 8-bit data output, DMA to quickly grab a frame, and the necessary RAM to buffer a raw snapshot....

$12.50

52 in stock

Top view of Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor powered by a Lipoly battery and an OLED display.

Adafruit LC709203F LiPoly / LiIon Fuel Gauge and Battery Monitor - STEMMA JST PH & QT / Qwiic

Product ID: 4712

$6.95

13 in stock

Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic

Product ID: 4867

$58.95

52 in stock

Adafruit MCP3421 18-Bit ADC - STEMMA QT / Qwiic

Product ID: 5870

The Adafruit MCP3421 18-Bit ADC is a simple, inexpensive, and easy to use 18-bit, 240 SPS, single-channel ADC with an I2C interface that can run up to 3.4MHz clock rate. A perfect component whenever you need an ADC that has differential inputs, adjustable gain, and a built in precision/low-drift reference voltage. One of the trade-offs with getting 18-bit precision...

$5.95

62 in stock

DS18B20 Digital temperature sensor next to a US quarter and above a resister.

DS18B20 Digital temperature sensor + extras

Product ID: 374

These 1-wire digital temperature sensors are fairly precise (±0.5°C over much of the range) and can give up to 12 bits of precision from the onboard digital-to-analog converter. They work great with any microcontroller using a single digital pin, and you can even connect multiple ones to the same pin, each one has a unique 64-bit ID burned in at the...

$3.95

In stock

Top view of humidity breakout above an OLED display FeatherWing. The OLED display reads: "HTU31 Demo Temp: 24.19ºC Hum: 37.13%"

Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Product ID: 4832

The HTU31-D is the third generation of temperature-humidity sensors from TE - and a great follow-up to the popular HTU21-D sensor. Like the HTU21, the '31 is great for sensing temperature and humidity, with excellent specifications. This I2C digital humidity sensor is an accurate and intelligent alternative to the common DHT-series sensors, at about the same price!...

$6.95

44 in stock

Adafruit LTR-303 Light Sensor - STEMMA QT / Qwiic

Product ID: 5610

The Adafruit LTR-303 Light Sensor a simple and popular low-cost I2C digital light sensor that is easy to integrate into your project for reliable and wide-ranging light measurements. Perfect for a wide range of project use cases: Should we turn up the brightness of our display or dim it to save power? Which direction should your robot move to stay in an area with the...

$4.50

In stock

Angled shot of a coiled up 5m Thermocouple Type-K Glass Braid Insulated wire.

Thermocouple Type-K Glass Braid Insulated - 5m

Product ID: 3895

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering which can melt at around 200°C, this one uses a fiberglass braid so it can be used in high temperature measurements such as heaters and ovens. There's...

$24.95

In stock

Angled shot of black rectangular breakout board with vertical light sensor.

Adafruit Right Angle VEML7700 Lux Sensor - I2C Light Sensor - STEMMA QT / Qwiic

Product ID: 5378

$4.95

In stock

Adafruit Si7021 Temperature & Humidity Sensor Breakout Board - STEMMA QT

Product ID: 3251

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 42% when it feels more like 77%. Enter the Si7021 Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This lovely sensor for Silicon labs has...

$9.95

In stock

Adafruit TSC2007 I2C Resistive Touch Screen Controller - STEMMA QT

Product ID: 5423

Getting touchy performance with your screen's touch screen? Resistive touch screens are incredibly popular as overlays to TFT and LCD displays. Only problem is they require a bunch of analog pins and you have to keep polling them since the overlays themselves are basically just big potentiometers. If your microcontroller doesn't have analog inputs, or maybe you want...

$4.95

68 in stock

PM2.5 Air Quality Sensor and Breadboard Adapter Kit - PMS5003

Product ID: 3686

Breathe easy, knowing that you can track and sense the quality of the air around you with the PM2.5 Air Quality Sensor with Breadboard Adapter particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness of post-apocalyptic Australia. And for those of us not living in an Outback...

$39.95

61 in stock

Adafruit OV5640 Camera Breakout - 72 Degree Lens with Autofocus

Product ID: 5840

$9.95

58 in stock

Angled shot of blue, square-shaped pressure-temperature sensor breakout.

MPL115A2 - I2C Barometric Pressure/Temperature Sensor

Product ID: 992

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. However, it's great for basic barometric pressure sensing. The sensor is soldered...

$9.95

In stock

Angled shot of blue, square-shaped breakout board.

Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout

Product ID: 3779

The colors of the rainbow, so pretty in the sky Are also in this sensor, controlled by you and I! Detect trees of green, and red roses too with the new Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout. This sensor from AMS has 6 integrated visible light sensing channels for red, orange, yellow, green, blue, and violet. These channels can be read via...

$19.95

38 in stock

Adafruit LPS22 Pressure Sensor - STEMMA QT / Qwiic - LPS22HB

Product ID: 4633

We live on a planet with an atmosphere, a big ocean of gaseous air that keeps everything alive - and that atmosphere is constantly bouncing off of us, exerting air pressure on everything around us. But, how much air is in the atmosphere, bearing down on us? This absolute pressure sensor, ST LPS22HB (a.k.a LPS22) can quickly and easily measure this air pressure,...

$6.95

62 in stock

PM2.5 Air Quality Sensor with I2C Interface - PMSA003I

Product ID: 4505

Breathe easy, knowing that you can track and sense the quality of the air around you with this PM2.5 Air Quality Sensor with I2C Interface particulate sensor. Mad Max & Furiosa definitely should have hooked up one of these in their truck while scavenging the dusty desert wilderness of post-apocalyptic Australia. And for those of us not living in an Outback...

$39.95

87 in stock

Adafruit AMG8833 IR Thermal Camera Breakout - STEMMA QT

Product ID: 3538

Add heat-vision to your project with an Adafruit AMG8833 Grid-EYE Breakout! This sensor from Panasonic is an 8x8 array of IR thermal sensors. When connected to your microcontroller (or raspberry Pi) it will return an array of 64 individual infrared temperature readings over I2C. It's like those fancy thermal cameras, but compact and simple enough for easy...

$44.95

In stock

Angled shot of black, rectangular pressure sensor breakout.

Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT

Product ID: 4258

Sometimes you need to sense pressure in a damp environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure. For the times you need to do both (or either), the LPS35HW is the pressure sensor for you. Combining protection from water intrusion with support for high precision relative and absolute measurements, this...

$12.50

In stock

Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic

Product ID: 4830

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touchpads with plug-and-play STEMMA QT connector and large alligator/croc-clip friendly pads, its a no-solder solution to capacitive touch sensing. The MPR121 has support...

$6.95

In stock

Adafruit OV5640 Camera Breakout - 160 Degree Wide Angle

Product ID: 5841

$17.50

34 in stock

Adafruit OV5640 Camera Breakout - 120 Degree Lens with Autofocus

Product ID: 5838

$14.95

89 in stock

Angled shot of temperature and humidity sensor breakout.

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board - STEMMA QT

Product ID: 1899

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This I2C digital humidity sensor is an...

$10.95

In stock

Adafruit PCT2075 Temperature Sensor with STEMMA QT / Qwiic cable plugged into a Feather showing the temperature

Adafruit PCT2075 Temperature Sensor - STEMMA QT / Qwiic

Product ID: 4369

The Adafruit PCT2075 Temperature Sensor is a 'code compatible' drop-in replacement for a very common I2C temperature sensor, the LM75. Compared to the LM75, however, the 11-bit ADC in the PCT2075 provides more precise measurements when compared to the LM75's 9-bit ADC. Additionally, because the PCT2075 allows the address pins to work in three states (high, low,...

$4.95

In stock

TTL camera module breakout with large lens

TTL Serial JPEG Camera with NTSC Video

Product ID: 397

This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can snap pictures at 640x480, 320x240 or 160x120 and they're pre-compressed JPEG images which makes them nice and small...

$39.95

In stock

Adafruit LPS33HW Water Resistant Pressure Sensor wired to a Feather and OLED via QT cables

Adafruit LPS33HW Water Resistant Pressure Sensor - STEMMA QT

Product ID: 4414

Sometimes you need to sense pressure in a damp or caustic environment. And sometimes you need to know the relative changes in pressure as well as the absolute pressure. For the times you need to do both (or either), the LPS33HW is the pressure sensor for you. Combining protection from water intrusion with support for high precision relative and absolute measurements,...

$12.50

In stock

Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic

Product ID: 4627

It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Enter the LIS331 family of accelerometers from ST, including the H3LIS331 and LIS331HH. As their model...

$24.95

29 in stock

Angled shot of a Adafruit MLX90640 IR Thermal Camera Breakout.

Adafruit MLX90640 IR Thermal Camera Breakout - 55 Degree

Product ID: 4407

$74.95

In stock

Angled shot of camera breakout board without lens cap.

Adafruit OV5640 Camera Breakout - 120 Degree Lens

Product ID: 5673

$19.95

100 in stock

Angled shot of a Adafruit LIS331 Triple-Axis Wide-Range ±24g Accelerometer.

Adafruit LIS331 Triple-Axis Wide-Range ±24g Accelerometer - STEMMA QT / Qwiic

Product ID: 4626

It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow. Enter the LIS331 family of accelerometers from ST, including the LIS331HH. As the model number suggests, the LIS331s are close cousins to the venerable LIS3DH accelerometer...

$10.95

In stock

Adafruit LTR-329 Light Sensor - STEMMA QT / Qwiic

Product ID: 5591

The Adafruit LTR-329 Light Sensor a simple and popular low-cost I2C digital light sensor that is easy to integrate into your project for reliable and wide-ranging light measurements. Perfect for a wide range of project use cases: Should we turn up the brightness of our display or dim it to save power? Which direction should your robot move to stay in an area with the...

$4.50

In stock

Angle shot of Adafruit Triple-axis Magnetometer - LIS2MDL with tan connectors

Adafruit Triple-axis Magnetometer - LIS2MDL - STEMMA QT / Qwiic

Product ID: 4488

Sense the magnetic fields that surround us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. This sensor tends to be paired with a 6-DoF (degree of freedom) accelerometer/gyroscope to create a...

$7.95

63 in stock

Touchscreen breakout connected to a display.

Adafruit TSC2046 SPI Resistive Touch Screen Controller

Product ID: 5767

$4.95

In stock

Fingerprint sensor with detection lens and socket cable

Basic Fingerprint Sensor With Socket Header Cable

Product ID: 4690

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's easy to use and more affordable than ever! These modules are typically used in safes - there's a high powered DSP chip that does the image rendering, calculation, feature-finding, and searching. Connect to any...

$19.95

75 in stock

TTL camera module breakout with small lens

Miniature TTL Serial JPEG Camera with NTSC Video

Product ID: 1386

This tiny little camera module can be a pretty neat project addition, it is just like our other JPEG cameras (same chipset/software), but much smaller and slimmer. It was designed to be used in security systems and does two main things - it outputs NTSC color video and can take snapshots of that video (in color) and transmit them over the TTL serial link. You can...

$35.95

5 in stock

Angled Shot of the Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board.

Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic

Product ID: 4535

Humidity is the concentration of water vapor (water when it's a gas) in the air. Some places have more and make you feel soggy and hot like you're in a sauna. Other places don't have much, which makes it easier to get nose bleeds and static zaps. These are just a few examples of how humidity can have a noticeable impact on things that grow, like mushrooms or humans,...

$9.95

In stock

Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235

Product ID: 4686

For fans of the TMP36, we now have a very similar analog temperature sensor with a 3-pin JST connector (we call these STEMMA connectors). Unlike many of our temperature sensors, this one is analog output, not I2C, so its best used by a microcontroller with an analog input, as most microcontrollers do. These sensors are very simple to use, no libraries or complex...

$2.50

In stock

Weatherproof camera with mounting bracket and ring of LEDs next to resistors

Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs

Product ID: 613

This weatherproof camera module is a classy upgrade to the basic camera module we already stock in the shop. The main differences is that this one comes in a nice metal case with a mounting hinge, a 1 meter long cable with the TTL & NTSC signals brought out, and it has an automatic IR LED system for night time photos. When the onboard photo-cell detects that it...

$54.95

In stock

Hand squeezing a water bottle into a potted plant with metal nail stuck into soil. Nail connects to Circuit Playground lit up green.

Circuit Playground Express Soil Sensor Mini Kit

Product ID: 4060

The thirst is real! Keep your flora (plants, not the board *wink*) happy and hydrated with the Circuit Playground Express Soil Sensor Mini Kit. This kit will teach you all about how to keep your plants in good condition, by measuring the soil moisture content using a nail and alligator clip, then display red or green LEDs on the Circuit Playground Express to tell you...

$35.00

In stock

Adafruit LPS25 Pressure Sensor wired up to a Feather with OLED via QT cable

Adafruit LPS25 Pressure Sensor - STEMMA QT / Qwiic - LPS25HB

Product ID: 4530

We live on a planet with an atmosphere, a big ocean of gaseous air that keeps everything alive - and that atmosphere is constantly bouncing off of us, exerting air pressure on everything around us. But, how much air is in the atmosphere, bearing down on us? This absolute pressure sensor, ST LPS25HB can quickly and easily measure this air pressure, useful when you...

$9.95

In stock

Angled shot of electret microphone breakout board.

Electret Microphone Amplifier - MAX4466 with Adjustable Gain

Product ID: 1063

Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX4466, an op-amp specifically designed for this delicate task! The amplifier has excellent power supply noise rejection, so this amplifier sounds really...

Notify Me

$6.95

Out of stock

Notify Me

Angled shot of a black rectangular ADC breakout board.

ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic

Product ID: 1085

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller...

Notify Me

$14.95

Out of stock

Notify Me

High Temp Waterproof DS18B20 Digital Temperature Sensor - 3m long

Product ID: 3846

Notify Me

$19.95

Out of stock

Notify Me

Angled shot of a blue rectangular ADC breakout board.

ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier - STEMMA QT / Qwiic

Product ID: 1083

For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels or two differential channels. As a nice bonus, it even includes a programmable gain amplifier, up to x16, to help boost up smaller...

Notify Me

$9.95

Out of stock

Notify Me

Angled shot of blue, rectangle GPS breakout board.

Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D - 99 channel w/10 Hz updates

Product ID: 5440

This version of the Ultimate GPS is even MORE Ultimate, with support for more GPS-like networks such as GLONASS, for even more coverage worldwide. It uses a slightly taller module than our classic Ultimate GPS, and uses a little more power. Otherwise its almost identical in functionality: -165 dBm sensitivity, 10 Hz updates, 99 channels. GPS + GLONASS support. 5V...

Notify Me

$29.95

Out of stock

Notify Me

Angled shot of round fingerprint sensor attached to 6-pin cable.

Ultra-Slim Round Fingerprint Sensor and 6-pin Cable

Product ID: 4750

Secure your project with biometrics - this adorably tiny, all-in-one, optical fingerprint sensor will make adding fingerprint detection and verification super simple. It's extremely slim, with a plastic casing that can be glued or panel mounted into any enclosure! There are some embedded blue LEDs that light up the outer casing when the sensor is waiting for finger...

Notify Me

$19.95

Out of stock

Notify Me

Ultrasonic Distance Sensor with I2C Interface - RCWL-1601

Product ID: 4742

If you're like me, you've dreamed of being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until genetic modifications catches up with our desires, we'll just have to make do with these handy 3V Ultrasonic Sonar Distance Sensor with I2C Interface and a pair of flippers. These ubiquitous sensors are...

Notify Me

$3.95

Out of stock

Notify Me

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board - with or without Headers

Product ID: 3926

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This I2C digital humidity sensor is an...

More Info

In stock

More Info

Fingerprint sensor

Product ID: 751

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered DSP chip that does the image rendering, calculation, feature-finding and searching. Connect to any microcontroller or system with TTL serial, and send...

$49.95

3 in stock

Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout

Product ID: 439

The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from up to 0.1 - 40,000+ Lux on the fly. The best part of this sensor is...

More Info

No longer stocked

More Info

AM2302 (wired DHT22) temperature-humidity sensor

Product ID: 393

Discontinued - you can grab AM2301B - Wired Enclosed AHT20 - Temperature and Humidity Sensor instead! The AM2302 is a wired version of the DHT22, in a large plastic body. It is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin...

More Info

No longer stocked

More Info

RGB Color Sensor with IR filter and White LED - TCS34725

Product ID: 1334

Discontinued - you can grab Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic instead! Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to...

More Info

No longer stocked

More Info

Encased I2C Temperature/Humidity Sensor with assorted mounting hardware

AM2315 - Encased I2C Temperature/Humidity Sensor

Product ID: 1293

Discontinued - you can grab AM2315C - Encased I2C Temperature/Humidity Sensor instead! Finally we have an I2C-interface temperature & humidity sensor in a nice enclosed style. This sensor contains a thermistor temperature sensor and a capacitive humidity sensor. A small microcontroller inside does the readings and provides a simple I2C interface for reading the...

More Info

No longer stocked

More Info

DHT11 basic temperature-humidity sensor with 10K resistor

DHT11 basic temperature-humidity sensor + extras

Product ID: 386

Discontinued - you can grab the DHT20 - AHT20 Pin Module - I2C Temperature and Humidity Sensor instead! The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to...

More Info

No longer stocked

More Info

Angled shot of a Melexis Contact-less Infrared Sensor.

Melexis Contact-less Infrared Sensor - MLX90614 3V - MLX90614ESF-BAA

Product ID: 1747

This cyber-tronic looking sensor hides a secret behind it's glimmering eye. Unlike most temperature sensors, this sensor measures infrared light emitted off of remote objects so it can sense temperature without having to touch them physically. Simply point the sensor towards what you want to measure and it will detect the temperature by absorbing IR waves emitted....

More Info

No longer stocked

More Info

DHT22 temperature-humidity sensor with 10K resistor

DHT22 temperature-humidity sensor + extras

Product ID: 385

The DHT22 is a basic, low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed). It's fairly simple to use but requires careful timing to grab data. The only real downside of this sensor is you can only get new data...

More Info

No longer stocked

More Info

Top down view of a Resistive Touch Screen Controller above a 11-pin header.

Resistive Touch Screen Controller - STMPE610

Product ID: 1571

More Info

No longer stocked

More Info

Adafruit VEML6070 UV Index Sensor Breakout

Product ID: 2899

Discontinued - you can grab Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic instead! This little sensor is a great way to add UV light sensing to any microcontroller project. The VEML6070 from Vishay has a true UV A light sensor and an I2C-controlled ADC that will take readings and integrate them for you over ~60ms to 500ms. Unlike the Si1145, this sensor will...

More Info

No longer stocked

More Info

Angled shot of a Adafruit Precision NXP 9-DOF Breakout Board.

Adafruit Precision NXP 9-DOF Breakout Board - FXOS8700 + FXAS21002

Product ID: 3463

The NXP Precision 9DoF breakout combines two of the best motion sensors we've tested here at Adafruit: The FXOS8700 3-Axis accelerometer and magnetometer, and the FXAS21002 3-axis gyroscope. These two sensors combine to make a nice 9-DoF kit, that can be used for motion and orientation sensing. In particular, we think this sensor set is ideal for AHRS-based...

More Info

No longer stocked

More Info

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board with header soldered in

Adafruit HTU21D-F Temperature & Humidity Sensor Breakout Board - Fully Assembled

Product ID: 3515

It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 52% when it feels more like 77%. Enter the HTU21D-F Temperature + Humidity Sensor - the best way to prove the weatherman wrong! This I2C digital humidity sensor is an...

More Info

No longer stocked

More Info

Angled shot of a Adafruit CCS811 Air Quality Sensor Breakout.

Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic

Product ID: 3566

Discontinued - you can grab the Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2 - STEMMA QT / Qwiic instead! Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. This sensor from AMS is a gas sensor that can detect a wide range of...

More Info

No longer stocked

More Info

TSL2561 Digital Lux / Light Sensor on round STEMMA breakout

Adafruit STEMMA - TSL2561 Digital Lux / Light Sensor

Product ID: 3611

New from Adafruit, we are taking our most popular sensors and making them easier than ever to use! This is the Adafruit STEMMA TSL2561 which takes our favorite lux sensor and gives you two ways to play: you can use alligator clips to connect the sensor to your Flora, Gemma or Circuit Playground, or plug-n-play with STEMMA cables or Seeed Grove cables Each STEMMA...

More Info

No longer stocked

More Info

Adafruit VEML6075 UVA UVB and UV Index Sensor Breakout

Product ID: 3964

This little sensor is a great way to add UVA and UVB light sensing to any microcontroller project. The VEML6075 from Vishay has both true UVA and UVB band light sensors and an I2C-controlled ADC that will take readings and integrate them. The sensor also comes with calibration registers so you can easily convert the UVA/UVB readings into the UV Index. Compared to our...

More Info

No longer stocked

More Info

TFmini Infrared Time of Flight Distance Sensor

Product ID: 3978

We've got many distance sensors, and the TFmini Distance Sensor is a nice addition. This sensor bounces light off objects and returns the distance in centimeters. It's a nice compact plastic package, with UART serial output. Please note that the company calls this a "LiDAR" but it is not a true LIDAR. Instead, its a time-of-flight (ToF) infrared sensor like the...

More Info

No longer stocked

More Info

Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor - Assembled

Product ID: 4059

Bosch has stepped up their game with their BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! This precision sensor from Bosch is the best low-cost, precision sensing solution for...

More Info

No longer stocked

More Info

Seeed Wio Terminal

Product ID: 4707

Instead of being a single embedded functional module, Wio Terminal is more of a complete system equipped with Screen + Development Board + Input/Output Interface + Enclosure. Because it uses the SAMD51, it is compatible with Arduino and CircuitPython - using the same Arduino & CircuitPython core we have developed here at Adafruit! Wio Terminal is an...

More Info

No longer stocked

More Info