Vibrating Mini Motor Disc
Qty | Discount |
---|---|
1-9 | $1.95 |
10-99 | $1.76 |
100+ | $1.56 |
Description
*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.
Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. The rated voltage is 2.5 to 3.8V and for many projects, we found it vibrates from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.
If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required!
Vibrating Mini Motor Disc (6:47)
Technical Details
- Dimension: 10mm diameter, 2.7mm thick
- Voltage: 2V - 5V
- 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
- 11000 RPM at 5V
- Weight: 0.9 gram
Learn
-
Circuitrocks
Philippines -
BerryBase
Germany -
Little Bird Electronics
Australia -
Electronilab
Colombia -
Pimoroni
United Kingdom -
NTREX, Inc.- Devicemart
South Korea -
Mouser Electronics
United States -
Eckstein Komponente
Germany -
DigiKey Electronics
United States -
Gotron BVBA
Belgium -
MicroCenter
United States -
Core Electronics
Australia
See our Distributors page for a complete list of distributors.